there was a problem parsing the package что делать
How to fix “Problem parsing the package error” in Android?
Jul 21, 2015 · 2 min read
The Reason of: Problem parsing package error
1. You might have turned off “Allow installation from unknown resources”
3. The app i s not compatible with the Hardware or version of the OS you are using
How to fit the Problem parsing package error?
We can easily solve the problem. There are 3 possible ways.
1. Allowing installation from unknown sources
Mostly we download the apps from the Google Play Store but sometimes we download the app from other sources and android does not allow us to install those apps.
To solve this problem, we have to just turn on “Allow installation from other sources”.
Follow these steps:
1. Go to settings on your device
2. Scroll down & Click on Applications
3. Check the box of “Unknown sources to allow installation of non Market Applications”
2. Inspect you APK file
If you have downloaded from another place than Google Play Store then download again from Google play store and then try to install it.
3. The App is not compatible with your OS or Hardware
If above two fixes do not work, then it is clear that the app is not compatible with your current OS version or not compatible with your device Hardware. Try to install it on another Android device with higher OS version and better hardware.
Ошибка There is a problem parsing the package
Как на данный смартфон ставить посторонние приложения?
Зарание спасибо)))
я не понимаю о чём ты говоришь
не знаю чо так. а почему с google play не ставишь? я так понимаю в настройках безопасности ты разрешил установку из неизвестных источников? если нет, то разреши и попробуй еще раз
возможно проблема тогда именно в этом приложении что ты пытаешься установить. другие apk когда прямо так с телефона ставишь тоже такая ошибка?
не знаю. это проблема с апк мне кажется. он повреждён или недокачивается до конца. откуда ты их берёшь? как скачиваешь? скачай с форума отсюда апк какой-то и скопируй его на телефон с пк и попробуй еще раз. вынес в отдельную тему. чтобы не засорять другую
ничего не изменилось.
тут дело может быть в прошивке, возможно ты удалил что-то из системы, а возможно ты просто пытаешься установить апк для Андроид версии выше, чем у тебя установлена на телефоне, судя по всему, если брать скриншот, у тебя версия Андроид 2.3 или 4.0.x
попробуй установить апк из этой темы, чисто для теста
ну вот в этом и проблема, как я и написал, ты пытаешься установить апк (само приложение) для ОС Android версии выше, чем у тебя установлена
А как мне сделать версию андроид выше 2.2.3?
а какой у тебя телефон? модель какая моторолы? возможно и никак, нужно смотреть
Motorola Droid A855 у него
ну тогда кастом можно поставить, есть циан для него 10 (Android 4.1)
Сергей Пащина, а какое ты приложение пытаешься установить? у тебя есть рут на телефоне?
ну тогда кастом можно поставить, есть циан для него 10 (Android 4.1)
Сергей Пащина, а какое ты приложение пытаешься установить? у тебя есть рут на телефоне?
Рута нет!
С этим возникли проблемы.
в общем по пунктам, часть первая:
затем отписываешь мне. скажу что дальше делать, сделай пока это
в общем по пунктам, часть первая:
затем отписываешь мне. скажу что дальше делать, сделай пока это
Рут получил,рекавери установил,что дальше?
дальше проделываешь следующее:
How to Fix There Was A Problem Parsing the Package
A window pops up saying “There was a problem parsing the package” while installing an app on Android? Here we’ve collected some useful tricks to fix the issue of there was a problem parsing the package on Android.
Android Issues & Fixes
Android System Issues
Android Apps Issues
Samsung Phone Issues
Android has become quite popular these years because of its user-friendly nature, cheaper than iPhone, open-source and other reasons. But still, there are some issues too. For example, there are some users reporting that they have received an error saying “there was a problem parsing the package”. How to solve this issue if you meet it?
Parsing error happens while installing an error on Android, which means the application cannot be installed due to apk parser i.e. parsing issue. This is quite annoying to see this error and you may have tried several ways to eliminate it, but still, it comes. Here in this guide, we’ll list some troubleshooting tips to fix the issue of there is a problem parsing the package on the Android device.
Let’s check out how to fix there was problem parsing the package on Android.
Tip 1. H ow to Fix There was a Problem Parsing the Package with System Repair Tool
When there was a problem while parsing the package, you may wonder how do I fix there is a problem parsing the package?В No more worries! Here in this part, you will easily learn a way to get the issue fixed. Unlike the other 6 tips, this tip definitely saves your time and labor.
Let’s meet DroidKit, an Android troubleshooter, which is dedicated to fixing AndroidВ problems without rootВ and also provides a better experience to the users while using the Android device. So howВ to fix parsing package errors on Android with DroidKit? Here are the steps.
Step 1. Download and install DroidKit on the computer (Windows & Mac supported). Also, connect your device to the computer with your USB cable.
Step 2. Run DroidKit on the computer right away. You can see there are lots of function sections. You should choose the Fix System Issues in the middle. More features if you are interested in, you can figure them out from its feature pages.
Click Fix System Issues
Step 3. All you can do now is to follow the instructions on the screen. Tap the Start buttonВ to go on the fixing journey.В It would be great if you are using a Samsung device asВ this function can only be applied to Samsung so far.
Click Start Button to Continue Fixing
Step 4. Then you will be asked to download firmware, put the device into Download mode, and then tap theВ Fix Now button toВ get the device fixed.
Fix Now after Firmware Downloaded
Step 5. Minutes later, when you see your device getting started itself which means your device gets fixed. Also, the next pageview will appear.
System Fixed Successfully
Tip 2. Turn onВ “Allow Installation of apps from Unknown Sources”
You can try to turn off this option and try again to install the apps you need. Go to Settings > locate your way to security (for Samsung Phone Users) or Location applications ( other brands) > look for the “Allow installation of apps from Unknown Sources” and enable it by ticking the box And the settings have been enabled.
Tip 3. Enable USB Debugging on Android
Go to Settings, scroll down and tap on About Phone and then tap seven times on the “Build Number”. You should see aВ “You are now a developer” message on the screen > go to Settings again, scroll down and tap on Developer Options. Under developer options, tap on USB debugging and enable it.
Tip 4. Disable Antivirus on Android Devices
Tip 5. Check Corrupted App File on Android
Sometimes the parse error may be caused by a corrupted apk. file and can’t be fully executed by your Android OS. In this case, you can try to download a new and complete APK file from Google Play Store and then try to install it again.
TipВ 6. Clear Cache Cookies in Play Store
There are chances that the problem of parsing the package on the Android device was caused by the cache cookies in the Google Play Store. Just open Google Play Store and select sidebar & choose “Settings” > then find out the clear option to clear the local search history.
Tip 7. The App is Not Compatible with OS
If you tried all these methods above and none of them worked, then the problem may exist in your Android operating system. The app you want to install could unable to support OS or it doesn’t support the hardware of your Android device, so you need to read the app description about its requirements.
Bonus Tip: How to Transfer Apps from Android to PC/Mac Computer
Sometimes it’s quite annoying when you found that the apps on your Android phone are not working and then there is a problem parsing the package when you try to install it again. To keep your apps in a safe and simple way, you can rely on AnyDroid to transfer apps from Android to PC or Mac as a local backup. And you can also transfer apps from a computer to an Android phone back if you need them. Let’s check the detailed steps below:
Step 1. Download and install AnyDroid to your computer before the start and then follow the procedures below.
Step 2. Run it and connect your Android device via a USB cable >Choose the Device Manager > Click on the Content to Computer on the right side.
Choose Content to Computer
Step 3. Select the apps you want to transfer to the computer.
Select Data Category to Send to Computer
The Bottom Line
You should have solved the problem of parsing the package while installing an app on Android phones with those simple tips we offered above. DroidKit provides an Android system repair tool for you to fix all system issues. And you can also backup your apps from Android to the computer via AnyDroid, which is an impressive Android data transfer tool. Just get it to your computer and start a free trial >
More Related Articles
Member of iMobie team as well as an Apple fan, love to help more users solve various types of iOS & Android related issues.
How to Fix There Was A Problem Parsing the Package
By Adela D. Louie, Last updated: October 21, 2021
A window pops up saying “There was a problem parsing the package” while installing an app on Android? Here we’ve collected some useful tricks to fix this problem.
Android devices are said to be one of the most popular smartphones today because Android devices have these user-friendly features, it is cheaper than other smartphones. Aside from these, Android devices actually have an open-source and it has a lot of reasons as to why it is one of the most popular smartphones today.
However, there are still some issues that you will experience on your Android device. Here, we are going to discuss one of the common issues that you might experience in using your Android device and also we have included some ways for you to fix this kind of issue.
Before Solving the Error:
Having concentrated on software development for several years, we have created an Android tool that is able to solve data problems.
Here is a tip: Download FoneDog Android Data Backup and Restore to keep all your apps on your Android phone safe. If you only want to fix the error by yourself, we have also found and collected some solutions for you to try below.
Android Data Backup and Restore Selectively backup Android data to computer with one click. Encrypt your backup files. Compatible with 6000+ Android devices. Free Download Free Download 
Part 1. Android Error “there was a problem parsing the package”
Many people would ask, what does this parsing means. The parsing error actually comes when we are trying to install an application on our Android devices. There are instances that when we download an app, we tend to encounter a message that says «there was a problem parsing the package«. If you have Samsung devices, you would ever search «There was a problem parsing the package Samsung Galaxy» or any other expressions online.
If you see this message upon downloading an application, this means that you are not able to download this app because of a certain APK parser. Now, another question that you might encounter is that why does this parse error really occurs.
There are many reasons why this message appears on your screen when you try to download an application.
1.1 The file might have downloaded incompletely
1.2 The application may not be compatible with the hardware or your operating system
1.3 This is because of a security setting
1.4 The APK may be a corrupted file
Part 2. Quick Fixes: “there was a problem parsing the package” on Your Android
Six Fixes on Parse Error on Android
FIX 1: ENABLE «ALLOW INSTALLATION OF APPS FROM UNKNOWN SOURCES»
You can go ahead and try to enable this in the settings of your Android device. Just do the following steps.
1. Launch Settings on your Android device
4. And then locate and choose «Allow installation of apps from Unknown Sources» and then have it turned on.
FIX 2: TURN ON USB DEBUGGING ON YOUR ANDROID PHONE
1. Go and launch settings on your Android device
2. After that, go ahead and tap on About Phone
3. Tap on «Build Numbers» seven times until you see a message that says «You are now a developer»
4. After that, go to your Settings again
5. Scroll down and then select Developer Options
6. And then choose and turn on USB Debugging
FIX 3: DISABLE YOUR ANTI-VIRUS
One of the reasons as to why you are experiencing the parse error «There was a problem parsing the package» or «There was a problem parsing the package Samsung Galaxy» is that if your security application is actually blocking the installation.
FIX 4: CHECK FOR ANY CORRUPTED APP FILE ON YOUR ANDROID DEVICE
FIX 5: CLEAR CACHE COOKIES FOR PLAY STORE
Another reason for the parsing error is the cache cookies of your Play Store. So from here, there might be a need for you to clear your cache cookies. For you to do this, all you need to do is to launch your Google Play store and then tap on the sidebar. From there, go ahead and locate and tap on Settings. And then go ahead and locate the clear option and then clear all your search history.
FIX 6: APP MIGHT NOT BE COMPATIBLE WITH YOUR OPERATING SYSTEM
There is also a possibility that the app you are trying to download is not compatible with your Android device, specifically with your operating system. The app you are trying to download may not also be compatible with your hardware which is the reason for the parsing error you are experiencing.
You maybe like to ask:
Click the links and find out your preferred solutions!
Part 3. A Great Way to Keep all You App Safe and Other Data on Your Android Device
This program supports over 8000 plus Android devices which actually includes those Android devices that were recently released because we make sure that the program is always updated because we certainly know how fast our technology changes nowadays.
Follow the steps below to begin backing up your Apps from your Android device.
Step 1: Open FoneDog Toolkit on Your PC
Once you have successfully installed the FoneDog Toolkit on your computer, go ahead and launch the program. Wile the FoneDog Toolkit is running, make sure that there is no other backup application running on your PC.
Step 2: Connect Your Android Device to your PC
Once you have launched the FoneDog Android Toolkit on your PC, go ahead and connect your Android device using your USB cable. Wait until the program detects your Android device. Once your Android device had been detected, go ahead and click «Android Data Backup and Restore» from the main interface of the FoneDog Toolkit.
REMINDER: In case that you are using an Android device that has a 4.0 OS version and above, you will be able to see a pop-up window on your screen asking you to turn on USB Debugging on your Android device. Once you have enabled USB Debugging, go ahead and tap on the ‘OK» button.
Step 3: Choose Backup Option and Data Type to Backup
You can go ahead and select the file type that you wish to backup and once you are done choosing the data you want to backup, go ahead and click on the » Start » button.
Step 4: Backup Complete
Once the backup is done, just go ahead and simply click on the » OK » button. You will then be able to see what your backup contains for each file that you selected. Since you have already backed up your data from your Android device, you will then be able to restore your backup file either to your computer or to your Android device.
#1: Launch FoneDog Toolkit and Connect your Android Device
Go ahead and run the program and then connect your Android device using your USB cable. After that, go ahead and click on » Device Data Restore » from the main page.
#2: Choose Backup File
#3: Choose Data and Restore.
REMINDER: Once that you have clicked on the Restore button, the system will then start the program and once you have confirmed all the data that you saved for then just go ahead and click on the «OK» button. Please do not disconnect your Android device from your PC. Do not try to open any applications as well during the eyes.
Bonus HERE!
If you have other data backups that are not created through FoneDog Android Data Backup and Restore but you want to restore them to your Android devices, you can use a powerful tool to help you realize the data transfer efficiently. FoneDog Phone Transfer is recommended! Download it and have a free trial now!
Part 4. Conclusion
Our Android devices really play an important role in our everyday lives. Our Android devices help us to connect with our families, friends, and other people which is the reason why we cannot afford to have our Android device that has an issue.
You will be able to download your data from your Android device to your computer. You can backup your contacts, text messages, call logs, WhatsApp, photos, videos, and more. This program is also compatible with almost all Android devices which will let you use it including those Android devices that just came out.
Video Guide: How to Fix Parsing a Package Issue
In this video, you can learn how to fix to parse a package problem and selectively backup and restore data on Android as well with few simple steps.
«Parse Error : There is a problem parsing the package» while installing Android application
I got this error while installing the android application ( Parse Error : There is a problem parsing the package. ). I did the following steps.
First time I installed the application and it works fine.
I made changes to the existing application and change the version no in Manifest file.
Then I export the application and finish the code signing process. For this, Right Click your Project node > select Export. There you will see a wizard. Follow the steps and finish the code signing also.
I got the ARDemo.apk file, Then I changed it’s name to ARDemo1.apk
Then I shipped this apk file to mobiles SD Card and started the installation I got the above error.
I googled, they say that problem with unpacking manifest file.
Can anyone tell me what could be wrong with me?
27 Answers 27
You said that the first time you installed the application it worked fine.
The only difference in the steps you outlined between the two versions are:
Try renaming the ARDemo1.apk file back to ARDemo.apk (make sure to back up the older version) and see if that helps. My guess is that it has something to do with the name of the apk.
If it still does not work, then you can eliminate the name of the apk file as the source of the problem and start investigating 2) by rebuilding your old version and see if you have same problem again. If the problem does not exists with the rebuilt version of your old code then you know it must be something to do with your code.
I hope that gets you somewhere.
Installation can give the specified error at least in following cases:
I’ve only seen the parsing error when the android version on the device was lower than the version the app was compiled for. For example if the app is compiled for android OS v2.2 and your device only has android OS v2.1 you’d get a parse error when you try to install the app.
Instead of shooting in the dark, get the reason for this error by installing it via adb :
Replace emulator-5555 with your device name. You can obtain a list using:
Upon failing, it will give a reason. Common reasons and their fixes:
The reason is apk is not signed. Once the apk is signed, the issue will be resolved. http://ionicframework.com/docs/guide/publishing.html Please use the link on instructions to sign the apk.
If you’re compiling and exporting your apk file under SDK version 2.1, it will not work on any android version below your SDK export «2.1». Android software is forward compatible not backward compatible. For example if you’re programming using the android NDK (ann add-on to the android SDK) package that allows development in the C/C++ family, this is only compatible with android 2.3, android version 2.2 and below support java builds only. Therefore you will reaceive the «There is a problem parsing the package» error.
I’m not repeating what is instructed here to input the Key store, password, etc. Try
I don’t know why, but at least it worked in my situation.
Another possibility is that you have saved the apk file into application PRIVATE folder and then try to install (by starting an intent from your code). in this case, when you start intent, you get error parsing package. In this case, the raised error is about permission issues. The point is saving the file into private folders is not a good practice, however if you really want to do that, you should write file in MODE_WORL_READABLE when you download it. Please consider that MODE_WORLD_READABLE is deprecated and this solution is not the best as it has some security issues. The best is to save your file in an external storage.
ApKatcher isn’t the only solution. A colleague of mine got around the problem by installing Astro File Manager.
You can find both applications in the Android Marketplace.
Similar issue, using this «borrowed» and slightly modified code:
Needed to change the file creation to this (comma instead of plus in the File constructor, was missing ‘/’ after the download directory):
I had a bad tag pair in my manifest file.
Basically got in when I copied a bad meta-data sample code from payu pdf file. Crap.
One reason could be, that your activity’name is not defined in the manifest
above code was creating the same issue with me
And just to help possible new readers, another reason may be errors in the manifest file. I had mistyped android:service as android.service and ran into the same error.
As mentioned by @Veneet Reddy install it via ADB.
Then run adb devices command which will list the connected devices or emulators that are running.
Note: uninstall the app if you have already installed before installing again.
There was an option to check canRequestPackageInstalls () When this method returns true then app get installed successfully. It was returning false always in my case.
So first I check this and then let the user to download and install updates.
Then when need to install update then-
Hope it will help someone.
For anyone else having this issue the only time i ever got this error was when the API version in your Android Build configuration does not match what’s on the physical device.
Go into Eclipse and right click on your project and go to properties. Select Android—WHICH BRINGS YOU TO ANDROID BUILD TARGET. Adjust you target to match the device and see if that resolves the issue.
I had this problem, even when I specified the correct minSDK and targetSDK version. My problem was, I was using «android:theme=»@android:style/Theme.NoTitleBar.Fullscreen» in launcher activity, on Jellybean device. When I removed this attribute, it worked.
As a couple of the other answers have mentioned, there can be problems when installing from the SD card. In my case I was distributing my app via email attachment, and it usually worked fine. Just open the email and download the attachment (it apparently goes to the SD card) and click on it again and it gets installed.
But then one day it didn’t work, and it turned out it was because I had the phone connected to my development PC via USB, and that placed the SD card in a different mode or something. So the solution was simply to disconnect the phone from the PC and then send the e-mail again and download the attachment again. Or else place the USB connection in «charging only» mode so the SD card is not «connected» to the PC.
You might also want to check the logs on the device to see if it’s something simple like a permissions problem. You can check the logs using adb from a host/debug computer:
Or if you have access to the console (or when using Android-x86 get console by typing Alt + F1 ) then you can check the logs by using the logcat command:
P.S. apk file in bin folder is created after first time you run the application in eclipse.
In my case I signed with only V2 signature (from Android 7 onward) but tried to install on 5 and 6. Adding V1 during ARK generation/signing fixed the issue.
In my case build 1 was installed correctly in my mobile using the signed APK (also from Google Play Store). But when I update the application with build 2 for first time, I had an issue installing it with the signed APK as I got «There was a problem parsing the package».
I tried several methods as specified above. But did not work.
After some time, I rerun the commands
and surprisingly, it worked.
It seems sometimes the APK built might be corrupt. So, Re-running jarsigner and zipalign commands resolved my issue.
use it inside build.gradle (Module:app)
This error also comes when Android version is less than minSdkVersion
Check your manifest and gradle file again.
I am experiencing the same “Parse error: There is a problem parsing the package “ error message with my signed APKs as others but I suspect it could be caused by different reasons.
To test this I did the following:
Setup Windows 8.1 Eclipse ADT Build: v22.6.2-1085508
I generated a typical new Helloworld app accepting all defaults.
I ran the app on an emulator and live device successfully.
I then sideloaded and installed the apk to my live device and ran it successfully.
It had generated an apk in the bin folder with a size of 782 KB.
I then exported the Helloworld app to the same bin folder signing the app from my key store which has been used successfully in the past to promote to Google Play.
It created an APK with a size of 385 KB (replacing the original apk).
I sideloaded the apk to my device and when I went to install it I got the error “Parse error: There is a problem parsing the package” (this is the same package that sideloaded and installed when done as a non exported form).